OPERATING MANUAL
1. Place the subject Person in comfortable position. Sitting or lying.
2. Drink 1 glass of Luke warm water.
3. Prepare the machine in the safe place.
4. First step. Connect the clip in earth ground using metal rod. Or clip in metal window without paint.
5. Second step. Check the switches in off positions.
6. Third step. Plug the cord to 220 volt outlet.
7. Fourth step. Check the power to open the knob. Then close again.
8. Fifth step. Check the pulse by using one rca cord. Insert to ion & booster outer jack. Open the power in full. Then adjeust pulse knob.
9. If the pulse shows. Close the power knob. But do not touch the pulse knob.
10. Sixth step. Remove the connector checker. Replace for one rca male jack then connect one strap, Another one rca connector, connect one strap again.
11. Seventh step. The 2 strap connect it to left and right feet only.
12. Eight step. Open the power switch in maximum level. The pulse shows continue blinking. If the pulse is to high reduce the power using the power control, located in front of device.
13. Nineth step. Standby and wait for the time.
14. Tenth step. After time is finished, give another one glass of luke warm water. Then close the power knob. do not stand, rest for 20 to 30 minutes.